What is industrial wood?
The term "industrial wood" is used to distinguish it from "natural wood" - wood from timber. Industrial wood is a type of wood that uses glue or chemicals combined with wood to make wood panels.
- Most industrial wood is made from recycled materials, recycled materials, and branches of natural wood.
- The wood of international name is Wood - Based Panel.
Basic types of wood base:
Selecting a good wood will ensure the durability and longevity of the product. Currently there are the following types of wood base:
MFC board wood chipboard:
This type of wood is made up of tree branches, tree branches or planted woody stems (eucalyptus, acacia, rubber ...), high mechanical strength, wide surface size, rich in species. Then put into crushed into chips and mixed with special glue to squeeze into boards of different thicknesses such as 9ly, 12ly, 15ly, 18ly, 25ly, wood chips with a variety of white chips , moisture blue, black wood ... Size of the board according to standard: 1220mm x 2440mm.
Chipboard characteristics are not smooth, with the naked eye you can easily distinguish the wood chips. Most of the products like desks, cabinets use this type of reinforcement.
If you have not yet identified this wood and other industrial woods, please refer to the MFC Industrial Wood Characteristics and Identification article.
MDF wood:
MDF stands for Density Medium Density Sheet. These are the types of wood that are made up of branches, which are then fed to the mill and mixed with specialty glue to compress the boards with different thicknesses such as 3ly, 6ly, 9ly, 12, 15, 18, 25. Panel size: 1220mm x 2440mm.
You can see the complete difference between particleboard and planks. As the name suggests, see with the naked eye that beautified, flat wood surface. With smarter technology, MDF is more valuable than particleboard. This is the core element of the material that creates the materials to create office furniture products: high-grade desks, office cabinets, motors ...
There are four types of MDF wood are classified according to the type of timber origin and adhesives as additives are:
- MDF is used indoors (furniture products).
- Water resistant MDF: used for some outdoor, wet places.
- Plain MDF: to be painted right away, without much rubbing
Non-slip MDF: Use for Veneer.
MFC wood:
MFC stands for Melamine Faced Chipboard - a wooden reinforcement produced from wood woods such as eucalyptus, glue, rubber, … To produce MFC wood, people often use crusher to crush wood into wood chips then mixed with specialized glue to press into planks of different thin thickness. The surface of the board is coated with different decorative materials such as: melamine, veneer,...
The structure of MFC wood: MFC wood is made up of chipboard wood and melamine surface coating plate. The main material for making chipswood is made from short-term forest woods such as eucalyptus, glue, rubber, ... and wood scraps in processing such as sawdust, corn cover, phosphorus, etc.
HDF wood
HDF (High-Density-Fiberboard) wood is a natural wood that is usually smoothly grinded and mixed with specialized glue combined with additives to increase hardness for wood and termite resistance. After undergoing the processing, the board will be cut to the size of industrial wood and covered with a layer of melamine and fiberglass to keep the color and help the wooden sprinkle beautiful and not scratched.
The construction of HDF wood: HDF wood is a wood made from 80-85% natural wood and leverages materials such as excess wood, branches, tree tops and short regeneration woods to make the main raw material, constituting wood plate.
Acrylic wood
Acrylic wood is a wood made from industrial wood and coated on the surface of an Acrylic layer. Thanks to Acrylic coating all products made from Acrylic wood have a glossy, smooth surface.
The structure of Acrylic Wood: Acrylic Wood is made from industrial wood and an Acrylic coating.
Plywood
Plywood wood is a wood made by linking veneer panels together into a solid piece.
The creation of Plywood: This type of wood is made from many thin wood panels, of the same size and stacked then adhesive by special specialized glue.
WPB (Water Proof Board)
It is a wood type structured by plastic origin. WPB wooden rolls are very light weight and have good water resistance.
WPB wood is widely used for advertising designs, interior-exterior decoration, especially waterproof door designs, kitchen cabinet, sanitary walls, etc.
This type of wood has superior durability, especially without warping, termites, moldy and very safe for the health of the user.
Black HDF or Compact Density Fiber Board
CDF wood or Black HDF wood is a type of wood with moisture resistance, extremely good water resistance, so this type of wood is suitable for use for humid spaces such as bathroom, sanitary partitions, kitchen cabinets, etc.
The surface of this type of wood has a variety of colors. The color-dyed board core makes the decorative cutting details look more aesthetic.
Can be easily cleaned and cleaned.
VNCC understands that one of the most important aspects of any furniture project is the delivery and installation of the product. With this in mind, we work with experienced fitting teams we trust and oversee the process to ensure the installation runs smoothly and efficiently. When you work with VNCC, you will be supported by a dedicated project manager who will oversee the whole project from the initial conversation to the final installation.
Some realistic images of industrial wood construction:
